Standards and Reference Materials
ISO 9001
Quality management and consistent manufacturing
ISO 14001
Environmentally responsible manufacturing processes
BS EN 988
Specification for rolled flat zinc and zinc alloys for products for buildings
|
A90/A90M- Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
|
|
A123/A123M- Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
|
|
A153/A153M- Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
|
|
A239- Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles |
|
|
A385- Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) |
|
|
A428/A428M- Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles |
|
|
A459- Standard Specification for Zinc-Coated Flat Steel Armoring Tape |
|
|
A653/A653M- Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
|
|
A742/A742M- Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe |
|
|
A754/A754M- Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence |
|
|
A755/A755M- Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
|
|
A760/A760M- Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
|
|
A761/A761M- Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
|
|
A780- Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
|
|
A792/A792M- Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
|
|
A796/A796M- Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications |
|
|
A798/A798M- Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications |
|
|
A807/A807M- Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
|
|
A875/A875M- Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process |
|
|
A879/A879M- Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
|
|
A885/A885M- Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe |
|
|
A896- Standard Practice for Conducting Case Studies on Galvanized Structures |
|
|
A902- Standard Termninology Relating to Metallic Coated Steel Products |
|
|
A917- Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) |
|
|
A924/A924M- Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process |
|
|
A926- Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe |
|
|
A929/A929M- Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe |
|
|
A964/A964M- Standard Specification for Corrugated Steel Box Culverts |
|
|
A1003/A1003M - Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members |
|
|
A1004/A1004M - Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members |
|
|
A1030/A1030M - Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products |
|
|
A1046/A1046M - Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process |
